|
|
Changing Preferences
Changing Preferences
Note: The ETMC software comes from the factory with the paths to PPP, TMC Capture, TOC Builder, and Link Builder already specified. In most cases, it is unnecessary for the information in these fields to be changed.
To change preference settings:
| 1. | From the Job menu, select Preferences.
|
| 2. | In the Preferences dialog box, specify a path for PPP by doing one of the following:
|
| · | Enter the path to where PPP is installed in the PPP field.
|
| · | Click Open Folder  to the right of the PPP field.
|
| · | In the Open dialog box, locate and select PPP and click Open.
|
| 3. | To specify the location for TMC Capture, do one of the following:
|
| · | Enter the path to where TMC Capture is installed in the TMC Capture field.
|
| · | Click Open Folder to the right of the TMC Capture field.
|
| · | In the Open dialog box, locate and select TMC Capture and click Open.
|
| 4. | To specify a path for TOC Builder, do one of the following:
|
| · | Enter the path to where TOC Builder is installed in the TOC Builder field.
|
| · | Click Open Folder to the right of the TOC Builder field.
|
| · | In the Open dialog box, locate and select TOC Builder and click Open.
|
| 5. | To specify a path for Link Builder, do one of the following:
|
| · | Enter the path to where Link Builder is installed in the Link Builder field.
|
| · | Click Open Folder to the right of the Link Builder field.
|
| · | In the Open dialog box, locate and select Link Builder and click Open.
|
| 6. | In the Preferences dialog box, Click OK.
|
© 1998-2004 ELAN GMK
|
